Моля, въведете вашето потребителско име и парола.
Изчакайте зарежда се ..
Изчакайте зарежда се ..
  • на склад
  • нови цени
  • нов продукт
  • с намаление
  •  
  • промоция
  • с подарък
  • разпродажба
  • ремаркетирани

НАЙ-ТЪРСЕНИ ПРОДУКТИ

1

№ NT-0103
Инструмент
Lanberg universal stripping tool for cables
Предназначен заОбща употреба
Х-ка 2Lanberg's wire stripper NT-0103 primary application is to remove insulation from STP/UTP LAN, computer, audio, SPT-1 / SPT-2 or any other cables.

Lanberg universal stripping tool for ...

Lanberg universal stripping tool for cables
№ NT-0103
№ NT-0001
Инструмент
Lanberg insertion tool for lsa connection
Предназначен заОбща употреба
Х-ка 2Used for crimping/terminating network cables in accordance with LSA technology, used in practice, to perform the cable terminations for the purposes of flush and surface mount data boxes, ICT surface boxes, patch panels and many other devices.
Х-ка 3The device is ideally suited for LSA sockets used in xDSL and ISDN networks, as well as, for the cables with LSA connectors and blocks of telephone connector panels.
Х-ка 4Due to the fact, that a single wire cannot be in insulation, the LSA technique of stripping the insulation eliminates this particular problem, which translates to the practical use of this product.
Х-ка 5Allows connection of cables with a diameter of: 0.35mm ~ 0.9mm and 0.7mm - 2.6mm.
Х-ка 6Color: white.

Lanberg insertion tool for lsa connec...

Lanberg insertion tool for lsa connection
№ NT-0001
№ NT-0101
Инструмент
Lanberg universal stripping tool for UTP STP telefon and data cable
Предназначен заОбща употреба
Х-ка 2Lanberg’s stripping tool NT-0101 is a universal device intended for all cable installers, with broad scope of applications, such as traditional electronic workshops or professional installation sites.
Х-ка 3This particular product is dedicated to stripping the external insulation or cutting cabling such as ethernet (UTP, FTP, SFTP), coaxial, data, telephone, LAN and electric wires.
Х-ка 4Appropriate design of the blades and flexible configuration of stripping tool ensures, that insulation layer of cable is correctly removed, without damaging any internal veins of a wire.
Х-ка 5Stripping insulation of round cables (rotation 1-3x): 1.3mm ~ 3.3mm.
Х-ка 6Stripping insulation of multi-conductor cables: 3.2mm ~ 9.0mm.
Х-ка 7Stripping insulation of installation wires: 0.3mm ~ 0.8mm.
Х-ка 8Stripping insulation of telephone and LAN wires: 8p (RJ-45 - 8P8C), 6p (RJ-14 - 6P4C & RJ-12 - 6P6C), 4p (RJ-9 - 4P4C), 2p.

Lanberg universal stripping tool for ...

Lanberg universal stripping tool for UTP STP telefon and data cable
№ NT-0101
№ NT-0102
Инструмент
Lanberg universal stripping tool for UTP STP and data cables
Предназначен заОбща употреба
Х-ка 2Lanberg's universal tool for removing the insulation (RG5 /6 and 7/11 with regulation) from cables.
Х-ка 3This easy-to-use tool can be used for coaxial or round and flat network cables.
Х-ка 4Durable blades are of great quality and can withstand up to approx. 5,000 cuts.

Lanberg universal stripping tool for ...

Lanberg universal stripping tool for UTP STP and data cables
№ NT-0102
№ NT-0601
Инструмент
Lanberg M6 cage nut insertion and removal tool
Предназначен заОбща употреба
Х-ка 2Save time and effort while installing / removing M6 cage by gearing up with Lanberg's cage nut installation tool.
Х-ка 3This handy tool application is to assist you with inserting and removing M6 cage nuts when installing rack equipment inside the server cabinet.
Х-ка 4The design of the tool allows to quick access to hard-to-reach assembly positions.
Х-ка 5Grasp the tip of M6 cage nut using the end of the tool, then place the cage nut in the desired location and release the grip on the tool's handle.
Х-ка 6When removing the M6 cage nuts, grasp the element you want to remove with the end of the tool and pull the cage nut out of the mounting rail.

Lanberg M6 cage nut insertion and rem...

Lanberg M6 cage nut insertion and removal tool
№ NT-0601
№ NT-0803
Инструмент
Lanberg hex key/allen wrench set with ball end 9pcs
Предназначен заОбща употреба
Х-ка 2A set of long hex keys in sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 [mm] is available in the form of a blister. The ball at the end of the longer key arm helps to unscrew the bolts, to which access is difficult (often at an angle).
Х-ка 31.5 - lenght 75mm, 2.0 - length 85mm, 2.5 - 90mm length, 3.0 - length 100mm, 4.0 - length 110mm, 5.0 - length 125mm, 6.0 - length 140mm, 8.0 - length 155mm, 10 - length 170mm

Lanberg hex key/allen wrench set with...

Lanberg hex key/allen wrench set with ball end 9pcs
№ NT-0803
№ AD-0030-BK
Инструмент
Lanberg precision screwdriver toolkit
Предназначен заОбща употреба
Х-ка 2Lanberg's precision DIY toolset
Х-ка 3Scraper, Engraver, Tweezers: 2 pieces (straight + curved), Plastic opening tools: 2 items
Х-ка 4Torx: T4, T5, T6
Х-ка 5Torx screwdriver: 0,8 mm
Х-ка 6Phillips screwdriver: 2.0 mm 1.2 mm
Х-ка 7Slotted screwdriver: 2.0 mm
Х-ка 8Y-screwdriver: 2.0 mm

Lanberg precision screwdriver toolkit

Lanberg precision screwdriver toolkit
№ AD-0030-BK
№ NT-0401
Инструмент
Lanberg cable tester for RJ-45, RJ-12, RJ-11, coaxial
Предназначен заОбща употреба
Х-ка 2Lanberg’s network cable tester is a multifunctional device for testing cables of ICT networks. The device is an indispensable tool for every installer and significantly helps to save time in verifying network wire pairs.
Х-ка 3With the help of this tool you can test connections of telephone wires terminated with RJ-11 connector and UTP, FTP, SFTP stranded cable terminated with RJ-45 plugs or wires terminated with coaxial plug.
Х-ка 4Cable tester equipped with RJ-45, RJ-12/RJ-11, and the coaxial connectors LEDs with power switch.
Х-ка 5Terminator (attachment) equipped with RJ-45 and RJ-12/RJ-11 connectors LEDs.
Х-ка 6Tester checks each vein separately (using two different speed modes) and the correctness of connection of the shield to the modular plug when the FTP wire (shielded) is tested.
Х-ка 7Automatic validation of connections in RJ-45 and RJ-11 cables; Slow test option; Signal measurement and control using 9 LEDs; Two different speed modes (automatic scan).
Х-ка 8Detection of incorrect connections; Detection of short circuits and breaks in wiring; Detection of junction of cable pairs; Detection of reversal of cable pairs.

Lanberg cable tester for RJ-45, RJ-12...

Lanberg cable tester for RJ-45, RJ-12, RJ-11, coaxial
№ NT-0401
№ NT-0201
Инструмент
Lanberg universal crimping tool for RJ11/12/45 connector
Предназначен заОбща употреба
Х-ка 2Lanberg’s crimping tool NT-0201 is an essential product intended for installer, who has, on a daily basis, contact with the ICT and telecommunications network cabling.
Х-ка 3This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-9, RJ-11, RJ-12 and RJ-45.
Х-ка 4On top of that, this convenient tool has a built-in additional insulation puller intended for flat and round cables with a diameter of approx. 6mm.
Х-ка 5For crimping modular connectors: 8p (RJ-45 - 8P8C), 6p (RJ-14-6P4C & RJ-12 - 6P6C), 4p (RJ-9 - 4P4C).
Х-ка 6The length of the blade: 14mm.
Х-ка 7Clamps made in accordance with CNC (numeric precision machining) standard.
Х-ка 8Arm length: approx. 150mm.

Lanberg universal crimping tool for R...

Lanberg universal crimping tool for RJ11/12/45 connector
№ NT-0201
№ NT-0202
Инструмент
Lanberg universal crimping tool for wires terminated with RJ11/12/45 connector
Предназначен заОбща употреба
Х-ка 2Lanberg’s crimping tool NT-0202 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring.
Х-ка 3This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45.
Х-ка 4On top of that, this convenient tool has a built-in additional insulation stripper intended for flat and round cables with a diameter of approx. 6mm.
Х-ка 5Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented.
Х-ка 6All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.

Lanberg universal crimping tool for w...

Lanberg universal crimping tool for wires terminated with RJ11/12/45 connector
№ NT-0202
№ NT-0402
Инструмент
Lanberg cable tester for wiring terminated with RJ-45, RJ-11
Предназначен заОбща употреба
Х-ка 2Lanberg’s network cable tester is a multifunctional device for testing wires of ICT networks.
Х-ка 3With the help of this tool, you can test connections of telephone wires terminated with RJ-11 connector and UTP, FTP, SFTP stranded cable terminated with RJ-45 connectors.
Х-ка 4Product’s main application is to measure the continuity of LAN cabling and verification of connections along with the detection of possible problems with cabling, such as short-circuits or incorrect pairings of wire.
Х-ка 5This particular device consists of two parts, each of them should be fixed correctly at the right ends of the tested cable.
Х-ка 6Cable tester equipped with RJ-45, RJ-12/RJ-11, LEDs with the power switch.
Х-ка 7Terminator (attachment) equipped with RJ-45 and RJ-12/RJ-11 connectors LEDs.

Lanberg cable tester for wiring termi...

Lanberg cable tester for wiring terminated with RJ-45, RJ-11
№ NT-0402
№ NT-0801
Инструмент
Lanberg set of 6 screwdrivers
Предназначен заОбща употреба
Х-ка 2The handle is made of plastic and rubber, which guarantees reliable grip.
Х-ка 36 Phillips type screwdrivers with non-slip handle.
Х-ка 4Available sizes: O4x50mm, O2.5x75mm, O5x80mm, O4x100mm, O5,5x125mm, O6,5x150mm;

Lanberg set of 6 screwdrivers

Lanberg set of 6 screwdrivers
№ NT-0801
№ NT-0104
Инструмент
Lanberg automatic wire stripper 0,5-6mm
Предназначен заОбща употреба
Х-ка 2It is used to remove insulation and crimping of connector terminals.
Х-ка 3Terminal dimensions - 7-8mm2.
Х-ка 4Working range from 0.5 to 6mm2, for crimping 1.5 to 6mm2 terminals.
Х-ка 54.0-6.0mm2 - AWG 10-22.
Х-ка 60.5-2.5mm2 - AWG 14-22
Х-ка 7The cutting jaws are made of extremely durable steel with a hardness of 40-55 HRC, which ensures long tool durability.
Х-ка 8The ergonomic handle increases the comfort of work.

Lanberg automatic wire stripper 0,5-6...

Lanberg automatic wire stripper 0,5-6mm
№ NT-0104
№ SCC01-TCC-IT101
Инструмент
Lanberg 100pcs cable terminal kit with crimper toolbox
Предназначен заОбща употреба
Х-ка 2A set of 100 pcs of cable connectors, various types. All in a transparent box with a crimping tool. Suitable for 1.25-4mm cables.

Lanberg 100pcs cable terminal kit wit...

Lanberg 100pcs cable terminal kit with crimper toolbox
№ SCC01-TCC-IT101
№ NT-0802
Инструмент
Lanberg set of 4 screwdrivers, 4 flat-blade
Предназначен заОбща употреба
Х-ка 2High quality materials and workmanship - made of high quality chrome vanadium steel.
Х-ка 3A wide range of applications; Magnetized tips.
Х-ка 42 Flat screwdrivers: 4x75 mm; 6x120 mm; 8x150 mm.
Х-ка 53 Phillips screwdrivers: PH1x75 mm; PH2x100 mm; PH3x150 mm.
Х-ка 63 PZ cross screwdrivers: PZ1x75 mm; PZ2x100 mm.

Lanberg set of 4 screwdrivers, 4 flat...

Lanberg set of 4 screwdrivers, 4 flat-blade
№ NT-0802
№ NT-0303
Инструмент
Lanberg crimping toolkit with RJ45 connectors RJ45 shielded and unshielded
Предназначен заОбща употреба
Х-ка 2This particular set of Lanberg's tools for creating / building a LAN network infrastructure is an essential, basic toolkit for anyone who wants to properly wire ICT (telecommunication) cables for the purposes of their network.
Х-ка 3Lanberg’s universal crimping tool for crimping & cutting wires with RJ-11/12/45 connectors: NT-0202.
Х-ка 4Lanberg’s universal stripping tool for cables: NT-0103.
Х-ка 5RJ-45 UTP connectors.
Х-ка 6RJ-45 FTP connectors.

Lanberg crimping toolkit with RJ45 co...

Lanberg crimping toolkit with RJ45 connectors RJ45 shielded and unshielded
№ NT-0303
№ NT-0403
Инструмент
Lanberg cable tester for wiring terminated with RJ-45, RJ-11, USB
Предназначен заОбща употреба
Х-ка 2This tester has been designed to easily and quickly verify the correct pin out configuration.
Х-ка 3Cables that can be tested: USB (A/A, A/B), BNC 10-100-1000Base-TX, Coaxial, RJ45, RJ11/RJ12 (adapters added and hidden in the place for the battery).

Lanberg cable tester for wiring termi...

Lanberg cable tester for wiring terminated with RJ-45, RJ-11, USB
№ NT-0403
№ NT-0301
Инструмент
Lanberg network tool case w. network tools and tester
Предназначен заОбща употреба
Х-ка 2Lanberg’s universal network tool case is intended as an inseparable element of work of every network installer, whose daily routine includes managing, adjustment and preparation of telecommunication and ICT cables.
Х-ка 3Every single network tool which a part of this set is, can be stored inside of Lanberg’s convenient tool case, provided with this product bundle.
Х-ка 4Insertion tool for LSA connections, also known as punch tool for Krone IDC 110 connectors
Х-ка 5Stripping tool for network and telephone cables such as: UTP, FTP, SFTP LAN cables, coaxial etc.
Х-ка 6Crimping tool: intended for cables 8p (RJ-45 - 8P8C).
Х-ка 7Cable tester intended for RJ-45, RJ-12, RJ-11, coaxial connectors.
Х-ка 8 Cable tester for RJ-45, RJ-12, RJ-11 connectors, with cable pair identifier.

Lanberg network tool case w. network ...

Lanberg network tool case w. network tools and tester
№ NT-0301
№ NT-0404
Инструмент
Lanberg cable tester poe for RJ-45, RJ-12, RJ-11, coaxial
Предназначен заОбща употреба
Х-ка 2Lan tester can easily read the correct pin configuration of 10Base-T cable, 10Base-2 cable, RJ45/RJ11 modular cables, 258A, TIA-568A/568B and Token Ring cable etc. by comparing one transmitting end to the corresponding receiving end.
Х-ка 3Test the correct pin configuration of 10Base-T, 10Base-2 Ethernet cable, RJ45/RJ11 modular cables, 258A, TIA 568A/568B and Token Ring Cable etc.
Х-ка 4Easy to read cable status and verify cable continuity, open short and miswire.
Х-ка 5With remote kit, it can remotely test cable far away either on wall plate or patch panel.
Х-ка 6Test the grounding.
Х-ка 7With auto or manual scan.
Х-ка 8Operates with 9 Volt block battery (not included).

Lanberg cable tester poe for RJ-45, R...

Lanberg cable tester poe for RJ-45, RJ-12, RJ-11, coaxial
№ NT-0404
№ NT-0302
Инструмент
Lanberg network toolkit with RJ45 RJ11 cable tester, crimping, stripping and lsa-insertion tool
Предназначен заОбща употреба
Х-ка 2This particular set of Lanberg's tools for creating / building/testing a LAN network infrastructure is an essential, basic toolkit for anyone who wants to properly wire and verify ICT (telecommunication) cables for their network.
Х-ка 3Universal crimping tool for crimping & cutting wires with RJ-11/12/45 connectors: NT-0202.
Х-ка 4Universal stripping tool for UTP/STP network cables: NT-0102.
Х-ка 5Cable tester for ICT wires with RJ-45, RJ-11 connectors: NT-0402.
Х-ка 6LSA-Insertion tool: NT-0001

Lanberg network toolkit with RJ45 RJ...

Lanberg  network toolkit with RJ45 RJ11 cable tester, crimping, stripping and lsa-insertion tool
№ NT-0302
№ NT-0203
Инструмент
Lanberg crimping tool for RJ45, RJ12, RJ11 + cable tester
Предназначен заОбща употреба
Х-ка 2Universal 2in1 crimping tool and cable tester.
Х-ка 3This professional crimping & testing tool is designed for RJ45 and RJ11 plugs; has a twisted-pair tester built into the cradle's handles to disconnect one part of the tester from the crimper;
Х-ка 4Enables clamping of modular plugs: RJ45 - 8p8c, RJ11 - 6p2c, RJ12 - 6p6c, RJ14 - 6p4c
Х-ка 5Knives for cutting wires; knives for removing external insulation (flat cables)

Lanberg crimping tool for RJ45, RJ12,...

Lanberg crimping tool for RJ45, RJ12, RJ11 + cable tester
№ NT-0203
№ NT-0501
Инструмент
Lanberg multifunctional wire pair tracer RJ-45, RJ-12, RJ-11, coaxial
Предназначен заОбща употреба
Х-ка 2Lanberg’s cable tester with identifier of cable pairs NT-0501 is a multifunctional device for scanning and testing cables of ICT networks.
Х-ка 3It helps significantly save time in searching and verifying pairs wire networks and electric wires.
Х-ка 4The device locates, verifies the connection and detects any problems such as short circuits or incorrect cable pair connections. With the use of this particular Laberg’s device users can detect wires in most types of support terminals.
Х-ка 5Find the location of sought wires.
Х-ка 6Identify and verify wires and their overall condition.
Х-ка 7Test cable measurements and their continuity.
Х-ка 8Locate and verify any occurring short-circuits.

Lanberg multifunctional wire pair tra...

Lanberg multifunctional wire pair tracer RJ-45, RJ-12, RJ-11, coaxial
№ NT-0501
№ NT-0502
Инструмент
Lanberg multifunctional wire tracer
Предназначен заОбща употреба
Х-ка 2This easy to use tool traces non-energized wire for correct and easy identification. The transmitter connects to un-energized cables, wires or fuses while the receiver probe traces the wire path.
Х-ка 3Audio and visual indicators ensure precise wire identification. The adjustable sensitivity ensures identification of a single wire when multiple wires are close to each other.
Х-ка 4Multi-purpose wire tracer for identifying non-energized (non-live) wires.
Х-ка 5Adjustable sensitivity to identify a single wire when multiple wires are routed nearby.
Х-ка 6Adapter plugs included: RJ-45, RJ-11, coaxial cable and alligator clamps.
Х-ка 7Audible and visual indication.
Х-ка 8Practical auto-shutoff function after 30 minutes.

Lanberg multifunctional wire tracer

Lanberg multifunctional wire tracer
№ NT-0502
1