Мрежови устройства >> Инструменти

1 2

№ NT-0103

Инструмент

Lanberg universal stripping tool for cables

Предназначен за	Обща употреба
Х-ка 2	Lanberg's wire stripper NT-0103 primary application is to remove insulation from STP/UTP LAN, computer, audio, SPT-1 / SPT-2 or any other cables.

Lanberg universal stripping tool for ...

№ NT-0103

Сравни Цена

№ NT-0101

Инструмент

Lanberg universal stripping tool for UTP STP telefon and data cable

Предназначен за	Обща употреба
Х-ка 2	Lanberg’s stripping tool NT-0101 is a universal device intended for all cable installers, with broad scope of applications, such as traditional electronic workshops or professional installation sites.
Х-ка 3	This particular product is dedicated to stripping the external insulation or cutting cabling such as ethernet (UTP, FTP, SFTP), coaxial, data, telephone, LAN and electric wires.
Х-ка 4	Appropriate design of the blades and flexible configuration of stripping tool ensures, that insulation layer of cable is correctly removed, without damaging any internal veins of a wire.
Х-ка 5	Stripping insulation of round cables (rotation 1-3x): 1.3mm ~ 3.3mm.
Х-ка 6	Stripping insulation of multi-conductor cables: 3.2mm ~ 9.0mm.
Х-ка 7	Stripping insulation of installation wires: 0.3mm ~ 0.8mm.
Х-ка 8	Stripping insulation of telephone and LAN wires: 8p (RJ-45 - 8P8C), 6p (RJ-14 - 6P4C & RJ-12 - 6P6C), 4p (RJ-9 - 4P4C), 2p.

Lanberg universal stripping tool for ...

№ NT-0101

Сравни Цена

№ NT-0001

Инструмент

Lanberg insertion tool for lsa connection

Предназначен за	Обща употреба
Х-ка 2	Used for crimping/terminating network cables in accordance with LSA technology, used in practice, to perform the cable terminations for the purposes of flush and surface mount data boxes, ICT surface boxes, patch panels and many other devices.
Х-ка 3	The device is ideally suited for LSA sockets used in xDSL and ISDN networks, as well as, for the cables with LSA connectors and blocks of telephone connector panels.
Х-ка 4	Due to the fact, that a single wire cannot be in insulation, the LSA technique of stripping the insulation eliminates this particular problem, which translates to the practical use of this product.
Х-ка 5	Allows connection of cables with a diameter of: 0.35mm ~ 0.9mm and 0.7mm - 2.6mm.
Х-ка 6	Color: white.

Lanberg insertion tool for lsa connec...

№ NT-0001

Сравни Цена

№ NT-0601

Инструмент

Lanberg M6 cage nut insertion and removal tool

Предназначен за	Обща употреба
Х-ка 2	Save time and effort while installing / removing M6 cage by gearing up with Lanberg's cage nut installation tool.
Х-ка 3	This handy tool application is to assist you with inserting and removing M6 cage nuts when installing rack equipment inside the server cabinet.
Х-ка 4	The design of the tool allows to quick access to hard-to-reach assembly positions.
Х-ка 5	Grasp the tip of M6 cage nut using the end of the tool, then place the cage nut in the desired location and release the grip on the tool's handle.
Х-ка 6	When removing the M6 cage nuts, grasp the element you want to remove with the end of the tool and pull the cage nut out of the mounting rail.

Lanberg M6 cage nut insertion and rem...

№ NT-0601

Сравни Цена

№ NT-0102

Инструмент

Lanberg universal stripping tool for UTP STP and data cables

Предназначен за	Обща употреба
Х-ка 2	Lanberg's universal tool for removing the insulation (RG5 /6 and 7/11 with regulation) from cables.
Х-ка 3	This easy-to-use tool can be used for coaxial or round and flat network cables.
Х-ка 4	Durable blades are of great quality and can withstand up to approx. 5,000 cuts.

Lanberg universal stripping tool for ...

№ NT-0102

Сравни Цена

№ NT-0803

Инструмент

Lanberg hex key/allen wrench set with ball end 9pcs

Предназначен за	Обща употреба
Х-ка 2	A set of long hex keys in sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 [mm] is available in the form of a blister. The ball at the end of the longer key arm helps to unscrew the bolts, to which access is difficult (often at an angle).
Х-ка 3	1.5 - lenght 75mm, 2.0 - length 85mm, 2.5 - 90mm length, 3.0 - length 100mm, 4.0 - length 110mm, 5.0 - length 125mm, 6.0 - length 140mm, 8.0 - length 155mm, 10 - length 170mm

Lanberg hex key/allen wrench set with...

№ NT-0803

Сравни Цена

№ NT-0807

Инструмент

Lanberg Toolkit with ratchet screwdrivers Type T with holder and 20 bits

Предназначен за	Обща употреба
Х-ка 2	Universal tool - Ratchet screwdriver with replaceable bits. It has a solid handle with an ergonomic shape, equipped with a ratchet with a switch - right,left,lock. The ratchet used allows screwing in hard to reach places. Made of chrome vanadium steel CrV
Х-ка 3	Content - 1pc heavy duty ratchet typ t screwdriver, 19pcs bits, adapter
Х-ка 4	Indispensable in car services and garages, as well as in every DIY box. The ergonomic handle framed with non-slip rubber means that the hand does not get tired during long work

Lanberg Toolkit with ratchet screwdri...

№ NT-0807

Сравни Цена

№ NT-0202

Инструмент

Lanberg universal crimping tool for wires terminated with RJ11/12/45 connector

Предназначен за	Обща употреба
Х-ка 2	Lanberg’s crimping tool NT-0202 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring.
Х-ка 3	This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45.
Х-ка 4	On top of that, this convenient tool has a built-in additional insulation stripper intended for flat and round cables with a diameter of approx. 6mm.
Х-ка 5	Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented.
Х-ка 6	All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.

Lanberg universal crimping tool for w...

№ NT-0202

Сравни Цена

№ NT-0809

Инструмент

Lanberg Toolkit with ratchet screwdrivers angular 6 sockets 6 bits

Предназначен за	Обща употреба
Х-ка 2	Universal tool - Ratchet screwdriver with replaceable bits. It has a solid handle with an ergonomic shape, equipped with a ratchet with a switch - right, left, lock. Made of chrome vanadium steel CrV
Х-ка 3	Content - 1pc heavy duty ratchet screwdriver with bits hidden in handle, 6pcs bits, 6pcs sockets
Х-ка 4	Indispensable in car services and garages, as well as in every DIY box. The ergonomic handle framed with non-slip rubber means that the hand does not get tired during long work

Lanberg Toolkit with ratchet screwdri...

№ NT-0809

Сравни Цена

№ NT-0201

Инструмент

Lanberg universal crimping tool for RJ11/12/45 connector

Предназначен за	Обща употреба
Х-ка 2	Lanberg’s crimping tool NT-0201 is an essential product intended for installer, who has, on a daily basis, contact with the ICT and telecommunications network cabling.
Х-ка 3	This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-9, RJ-11, RJ-12 and RJ-45.
Х-ка 4	On top of that, this convenient tool has a built-in additional insulation puller intended for flat and round cables with a diameter of approx. 6mm.
Х-ка 5	For crimping modular connectors: 8p (RJ-45 - 8P8C), 6p (RJ-14-6P4C & RJ-12 - 6P6C), 4p (RJ-9 - 4P4C).
Х-ка 6	The length of the blade: 14mm.
Х-ка 7	Clamps made in accordance with CNC (numeric precision machining) standard.
Х-ка 8	Arm length: approx. 150mm.

Lanberg universal crimping tool for R...

№ NT-0201

Сравни Цена

№ NT-0808

Инструмент

Lanberg Toolkit with ratchet screwdrivers with extention bar 9 sockets 6 bits

Предназначен за	Обща употреба
Х-ка 2	Universal tool - Ratchet screwdriver with replaceable bits. It has a solid handle with an ergonomic shape, equipped with a ratchet with a switch - right,left,lock. The ratchet used allows screwing in hard to reach places. Made of chrome vanadium steel CrV
Х-ка 3	Content - 1pc heavy duty ratchet screwdriver with bits hidden in handle, 1pc steel extension bar, 9pcs sockets, 6pcs bits
Х-ка 4	Indispensable in car services and garages, as well as in every DIY box. The ergonomic handle framed with non-slip rubber means that the hand does not get tired during long work

Lanberg Toolkit with ratchet screwdri...

№ NT-0808

Сравни Цена

№ NT-0401

Инструмент

Lanberg cable tester for RJ-45, RJ-12, RJ-11, coaxial

Предназначен за	Обща употреба
Х-ка 2	Lanberg’s network cable tester is a multifunctional device for testing cables of ICT networks. The device is an indispensable tool for every installer and significantly helps to save time in verifying network wire pairs.
Х-ка 3	With the help of this tool you can test connections of telephone wires terminated with RJ-11 connector and UTP, FTP, SFTP stranded cable terminated with RJ-45 plugs or wires terminated with coaxial plug.
Х-ка 4	Cable tester equipped with RJ-45, RJ-12/RJ-11, and the coaxial connectors LEDs with power switch.
Х-ка 5	Terminator (attachment) equipped with RJ-45 and RJ-12/RJ-11 connectors LEDs.
Х-ка 6	Tester checks each vein separately (using two different speed modes) and the correctness of connection of the shield to the modular plug when the FTP wire (shielded) is tested.
Х-ка 7	Automatic validation of connections in RJ-45 and RJ-11 cables; Slow test option; Signal measurement and control using 9 LEDs; Two different speed modes (automatic scan).
Х-ка 8	Detection of incorrect connections; Detection of short circuits and breaks in wiring; Detection of junction of cable pairs; Detection of reversal of cable pairs.

Lanberg cable tester for RJ-45, RJ-12...

№ NT-0401

Сравни Цена

№ NT-0801

Инструмент

Lanberg set of 6 screwdrivers

Предназначен за	Обща употреба
Х-ка 2	The handle is made of plastic and rubber, which guarantees reliable grip.
Х-ка 3	6 Phillips type screwdrivers with non-slip handle.
Х-ка 4	Available sizes: O4x50mm, O2.5x75mm, O5x80mm, O4x100mm, O5,5x125mm, O6,5x150mm;

Lanberg set of 6 screwdrivers

№ NT-0801

Сравни Цена

№ NT-0402

Инструмент

Lanberg cable tester for wiring terminated with RJ-45, RJ-11

Предназначен за	Обща употреба
Х-ка 2	Lanberg’s network cable tester is a multifunctional device for testing wires of ICT networks.
Х-ка 3	With the help of this tool, you can test connections of telephone wires terminated with RJ-11 connector and UTP, FTP, SFTP stranded cable terminated with RJ-45 connectors.
Х-ка 4	Product’s main application is to measure the continuity of LAN cabling and verification of connections along with the detection of possible problems with cabling, such as short-circuits or incorrect pairings of wire.
Х-ка 5	This particular device consists of two parts, each of them should be fixed correctly at the right ends of the tested cable.
Х-ка 6	Cable tester equipped with RJ-45, RJ-12/RJ-11, LEDs with the power switch.
Х-ка 7	Terminator (attachment) equipped with RJ-45 and RJ-12/RJ-11 connectors LEDs.

Lanberg cable tester for wiring termi...

№ NT-0402

Сравни Цена

№ NT-0806

Инструмент

Lanberg Toolkit with ratchet screwdrivers with flexible extention bar 165mm 24 bits

Предназначен за	Обща употреба
Х-ка 2	Universal tool - Bit and bit set with ratchet knob. The ratchet used allows screwing in hard to reach places. Made of chrome vanadium steel CR-V
Х-ка 3	Content - 1pc heavy duty ratchet screwdriver with quick bit release function, 1pc 165mm flexible extension bar, 24pcs bits in 3 holders – 6.3x25 mm
Х-ка 4	Indispensable in car services and garages, as well as in every DIY box. The ergonomic handle framed with non-slip rubber means that the hand does not get tired during long work

Lanberg Toolkit with ratchet screwdri...

№ NT-0806

Сравни Цена

№ SCC01-TCC-IT101

Инструмент

Lanberg 100pcs cable terminal kit with crimper toolbox

Предназначен за	Обща употреба
Х-ка 2	A set of 100 pcs of cable connectors, various types. All in a transparent box with a crimping tool. Suitable for 1.25-4mm cables.

Lanberg 100pcs cable terminal kit wit...

№ SCC01-TCC-IT101

Сравни Цена

№ NT-0104

Инструмент

Lanberg automatic wire stripper 0,5-6mm

Предназначен за	Обща употреба
Х-ка 2	It is used to remove insulation and crimping of connector terminals.
Х-ка 3	Terminal dimensions - 7-8mm2.
Х-ка 4	Working range from 0.5 to 6mm2, for crimping 1.5 to 6mm2 terminals.
Х-ка 5	4.0-6.0mm2 - AWG 10-22.
Х-ка 6	0.5-2.5mm2 - AWG 14-22
Х-ка 7	The cutting jaws are made of extremely durable steel with a hardness of 40-55 HRC, which ensures long tool durability.
Х-ка 8	The ergonomic handle increases the comfort of work.

Lanberg automatic wire stripper 0,5-6...

№ NT-0104

Сравни Цена

№ NT-0303

Инструмент

Lanberg crimping toolkit with RJ45 connectors RJ45 shielded and unshielded

Предназначен за	Обща употреба
Х-ка 2	This particular set of Lanberg's tools for creating / building a LAN network infrastructure is an essential, basic toolkit for anyone who wants to properly wire ICT (telecommunication) cables for the purposes of their network.
Х-ка 3	Lanberg’s universal crimping tool for crimping & cutting wires with RJ-11/12/45 connectors: NT-0202.
Х-ка 4	Lanberg’s universal stripping tool for cables: NT-0103.
Х-ка 5	RJ-45 UTP connectors.
Х-ка 6	RJ-45 FTP connectors.

Lanberg crimping toolkit with RJ45 co...

№ NT-0303

Сравни Цена

№ NT-0804

Инструмент

Lanberg Set of screwdrivers and bits with magnitizer 50pcs

Предназначен за	Обща употреба
Х-ка 2	Universal tool - Magnetized tips, Chrome and hardened steel, Double injected soft handle
Х-ка 3	Content - 33pcs bits, 1pcs bit holder driver, 8pcs precision screwdrivers (6x38mm, 5x100mm, 6x125mm, 8x150mm, PH2x38mm, PH1x100mm, PH2x125mm, PH3x150mm)

Lanberg Set of screwdrivers and bits ...

№ NT-0804

Сравни Цена

№ NT-0802

Инструмент

Lanberg set of 4 screwdrivers, 4 flat-blade

Предназначен за	Обща употреба
Х-ка 2	High quality materials and workmanship - made of high quality chrome vanadium steel.
Х-ка 3	A wide range of applications; Magnetized tips.
Х-ка 4	2 Flat screwdrivers: 4x75 mm; 6x120 mm; 8x150 mm.
Х-ка 5	3 Phillips screwdrivers: PH1x75 mm; PH2x100 mm; PH3x150 mm.
Х-ка 6	3 PZ cross screwdrivers: PZ1x75 mm; PZ2x100 mm.

Lanberg set of 4 screwdrivers, 4 flat...

№ NT-0802

Сравни Цена

№ NT-0301

Инструмент

Lanberg network tool case w. network tools and tester

Предназначен за	Обща употреба
Х-ка 2	Lanberg’s universal network tool case is intended as an inseparable element of work of every network installer, whose daily routine includes managing, adjustment and preparation of telecommunication and ICT cables.
Х-ка 3	Every single network tool which a part of this set is, can be stored inside of Lanberg’s convenient tool case, provided with this product bundle.
Х-ка 4	Insertion tool for LSA connections, also known as punch tool for Krone IDC 110 connectors
Х-ка 5	Stripping tool for network and telephone cables such as: UTP, FTP, SFTP LAN cables, coaxial etc.
Х-ка 6	Crimping tool: intended for cables 8p (RJ-45 - 8P8C).
Х-ка 7	Cable tester intended for RJ-45, RJ-12, RJ-11, coaxial connectors.
Х-ка 8	Cable tester for RJ-45, RJ-12, RJ-11 connectors, with cable pair identifier.

Lanberg network tool case w. network ...

№ NT-0301

Сравни Цена

№ NT-0404

Инструмент

Lanberg cable tester poe for RJ-45, RJ-12, RJ-11, coaxial

Предназначен за	Обща употреба
Х-ка 2	Lan tester can easily read the correct pin configuration of 10Base-T cable, 10Base-2 cable, RJ45/RJ11 modular cables, 258A, TIA-568A/568B and Token Ring cable etc. by comparing one transmitting end to the corresponding receiving end.
Х-ка 3	Test the correct pin configuration of 10Base-T, 10Base-2 Ethernet cable, RJ45/RJ11 modular cables, 258A, TIA 568A/568B and Token Ring Cable etc.
Х-ка 4	Easy to read cable status and verify cable continuity, open short and miswire.
Х-ка 5	With remote kit, it can remotely test cable far away either on wall plate or patch panel.
Х-ка 6	Test the grounding.
Х-ка 7	With auto or manual scan.
Х-ка 8	Operates with 9 Volt block battery (not included).

Lanberg cable tester poe for RJ-45, R...

№ NT-0404

Сравни Цена

№ NT-0403

Инструмент

Lanberg cable tester for wiring terminated with RJ-45, RJ-11, USB

Предназначен за	Обща употреба
Х-ка 2	This tester has been designed to easily and quickly verify the correct pin out configuration.
Х-ка 3	Cables that can be tested: USB (A/A, A/B), BNC 10-100-1000Base-TX, Coaxial, RJ45, RJ11/RJ12 (adapters added and hidden in the place for the battery).

Lanberg cable tester for wiring termi...

№ NT-0403

Сравни Цена

№ NT-0302

Инструмент

Lanberg network toolkit with RJ45 RJ11 cable tester, crimping, stripping and lsa-insertion tool

Предназначен за	Обща употреба
Х-ка 2	This particular set of Lanberg's tools for creating / building/testing a LAN network infrastructure is an essential, basic toolkit for anyone who wants to properly wire and verify ICT (telecommunication) cables for their network.
Х-ка 3	Universal crimping tool for crimping & cutting wires with RJ-11/12/45 connectors: NT-0202.
Х-ка 4	Universal stripping tool for UTP/STP network cables: NT-0102.
Х-ка 5	Cable tester for ICT wires with RJ-45, RJ-11 connectors: NT-0402.
Х-ка 6	LSA-Insertion tool: NT-0001

Lanberg network toolkit with RJ45 RJ...

№ NT-0302

Сравни Цена

1 2

Търсене на продукт

Сравни